Start with the property age
Newer and conventional properties often suit Level 2. Older, extended, listed, or unusual homes usually need Level 3 detail.
Guidance
Use the official RICS resources below for the formal survey descriptions, then use the Bailey & Cronin notes to think through the practical questions buyers often face before exchange.
Choosing a survey
Newer and conventional properties often suit Level 2. Older, extended, listed, or unusual homes usually need Level 3 detail.
Cracking, damp staining, uneven floors, poor alterations, roof concerns, or signs of decay should push the decision toward a deeper inspection.
If you may need to renegotiate, ask for specialist quotes, or brief a solicitor, choose the survey that gives enough explanation to support that discussion.
Quick comparison guide
| Feature | RICS Level 2 Home Survey | RICS Level 3 Building Survey |
|---|---|---|
| Best suited for | Modern or conventional properties in reasonable condition | Older, larger, altered or unusual properties |
| Typical property age | Usually post-1930 | Often pre-1930 |
| Level of detail | Moderate level of detail | Very detailed and comprehensive |
| Inspection | Visual inspection of accessible areas | Thorough inspection with detailed analysis |
| Defect reporting | Identifies significant issues | Explains defects, causes and implications |
| Repair advice | General repair advice | Detailed repair and maintenance guidance |
| Photographs | Included as standard with Bailey & Cronin | Included as standard |
| Condition ratings | Yes | Yes |
| Suitable for | Standard houses, flats and bungalows | Older, extended or non-standard properties |
Survey option
Survey option
Timber and Damp
Damp and timber defects can be worrying for homeowners and buyers alike, but correct diagnosis is essential because moisture problems are often misunderstood, oversimplified, or treated before the cause has been established.
Good guidance starts with the building: external ground levels, rainwater goods, ventilation, plaster, timber condition, historic alterations, and patterns of use. The repair should follow the cause, not the other way round.
Moisture rising from the ground due to failed or bridged damp proof courses.
Water ingress through walls, roofs, or openings due to defects.
Moisture from internal air forming on cold surfaces due to poor ventilation.
FAQs
No. Low-level dampness can also relate to condensation, salts, bridged damp proof courses, external ground levels, leaks, poor ventilation, or defective rainwater goods.
Not always. Many moisture issues relate to ventilation, drainage, maintenance, or building defects rather than injected damp treatment.
Decay can point to long-running moisture problems. The important question is usually why timber became damp enough to decay in the first place.
Common buyer worries
Ask what evidence supports the diagnosis, whether the moisture source is active, and what repair is proportionate before accepting a treatment quote.
Clarify urgency, likely access requirements, and whether a contractor quote is needed before exchange.
Look for comments on construction quality, movement, drainage, roof junctions, and whether further documents should be requested by your solicitor.
Local property notes
Older terraces, period properties, and altered homes can benefit from more detailed comment on construction, damp risk, and maintenance history.
Mixed-age housing stock means survey level should be based on construction, alteration, and condition rather than postcode alone.
Coastal exposure and varied property types can make external maintenance, roof coverings, and moisture pathways especially relevant.
Stone, rendered, rural, and exposed properties may need careful consideration of ventilation, rainwater disposal, and older building fabric.
Next step